Yahoo Finance's Akiko Fujita breaks down the top stories around the world.
Yahoo Finance's Akiko Fujita breaks down the top stories around the world.
The Global Building Information Modeling Market size is expected to reach $12. 9 billion by 2026, rising at a market growth of 17. 2% CAGR during the forecast period. Software which is utilized during the different phases of planning and execution of infrastructural projects is known as Building information modeling (BIM).New York, April 22, 2021 (GLOBE NEWSWIRE) -- Reportlinker.com announces the release of the report "Global Building Information Modeling Market By Component, By Building Type, By Project Life Cycle, By Deployment Type, By Application, By End User, By Region, Industry Analysis and Forecast, 2020 - 2026" - https://www.reportlinker.com/p06064790/?utm_source=GNW With the help of this software, architects, engineers, and construction workers can get the extra tools & mediums for creating abstract design-themed buildings. The growth of the BIM market is expected to be fueled by the requirement for electrical, mechanical, and plumbing designs along with regulations for BIM adoption.In the last few years, the world has witnessed various developments in construction projects & activities. Different sections such as housing apartments, big buildings, commercial spaces, government complexes, and others fall under such activities. In addition, construction SMEs increasingly developing with a rapid pace and have fueled the market for BIM across the globe. Moreover, specific laws have been formulated by government that must be followed by construction organizations to adopt BIM exclusively for public sector buildings.Due to the surge in globalization & industrialization, there is an increasing need for the development of large-scale buildings and projects such as the construction of roadways, tunnels, and dams, and hence, considerable increment in the expenditure by the government and private sector has been witnessed. The growth of the market is supplemented by various advantages offered by BIM to Architecture, Engineering and Construction (AEC) including efficient collaboration, mode based cost forecasting among others.Component OutlookBased on Component, the market is segmented into Solution and Services. Among all components, the solution segment procured the maximum revenue share of the global building information modeling market in 2019 and would exhibit a similar trend throughout the forecast period. Massive adoption of building information modeling solutions among the AEC industry is responsible for this high share. The majority of companies have adopted these solutions to streamline all construction activities together like procurement and data management, which enhance the overall effectiveness of construction activities.Building Type OutlookBased on Building Type, the market is segmented into Commercial, Industrial and Residential. The commercial segment garnered the maximum revenue share. This is due to the development of towns and the establishment of malls & recreational grounds. The growth of the segment is boosted by the demand for energy-efficient buildings and sustainability schemes.Project Life Cycle OutlookBased on Project Life Cycle, the market is segmented into Preconstruction, Construction and Operations. Preconstruction would be the major segment of the market. BIM includes the total process right from the preconstruction phase to the operation phase. The first phase is Preconstruction. This phase comprises of programming, visualization, cost planning, specification, detailing, conceptualization, architectural, structural, systems design, analysis, and coordination.Deployment Type OutlookBased on Deployment Type, the market is segmented into On-premise and Cloud. On the basis of deployment mode, the on-premise segment emerged as the leading segment of the building information modeling market in 2019 and would show the same trend throughout the forecast period. A surge in concerns regarding data security about construction projects, which is extremely beneficial, is responsible for the segment growth.Application outlookBased on Application, the market is segmented into Planning & Modelling, Asset Management, Construction & Design, Building System Analysis & Maintenance Scheduling and Others. The asset management segment would display maximum growth during the forecast period, as the BIM helps in improving the capacity of infrastructure owners and their suppliers to execute and create tools, processes, and collaborative working practices that maximize asset costs and performance over the complete life cycle of assets.End User OutlookBased on End User, the market is segmented into Architects/Engineers and Contractors & Others. The architect and engineer segment would lead the revenue share. Using this software, the designers and builders can better comprehend the imminent challenges of the projects in advance. By adopting this software, facility and construction can acquire constant insights into the process. This would fuel the demand for the software.Regional OutlookBased on Regions, the market is segmented into North America, Europe, Asia Pacific, and Latin America, Middle East & Africa. Asia Pacific would display substantial growth during the forecast period, as there is the massive adoption of BIM technologies in the region, due to the thriving construction industry. The region has witnessed a booming retail sector and growth in infrastructure and these are some of the main aspects fueling the development of the building information modeling market.The major strategies followed by the market participants are Product Launches. Based on the Analysis presented in the Cardinal matrix; Schneider Electric SE and Autodesk, Inc. are the forerunners in the Building Information Modeling Market. Companies such as Bentley Systems, Inc., Dassault Systemes SE, Trimble, Inc., Nemetschek Group, and Hexagon AB are some of the key innovators in the market.The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include Autodesk, Inc., Nemetschek Group, Bentley Systems, Inc., Trimble, Inc., Dassault Systemes SE, Hexagon AB, Schneider Electric SE, Asite limited, Archidata, Inc., and The Beck Group.Recent strategies deployed in Building Information Modeling MarketPartnerships, Collaborations, and Agreements:Dec-2020: RIB Software, a subsidiary of Schneider Electric came into partnership with SoftwareONE Holding AG, a leading global provider of end-to-end software and cloud technology solutions. The partnership aimed to boost bringing to market the world-leading MTWO vertical cloud solution for the Engineering, Architecture, and Construction (AEC) industry across the world. Through the partnership, both companies focus on jointly leading the digitalization of the world’s largest industries.Dec-2020: Asite collaborated with Amodal, the information management service provider. Under this collaboration, Amodal acts as a Value-Added Service Provider (VASP), assisting Asite to strengthen their relationships within the industry, and offer an improved value to prevailing customers.Nov-2020: Spacewell, a subsidiary of Nemetschek partnered with ISS Facility Services, a facility management services company. The partnership includes updates to benefit from improved functionality and high-quality desktop and mobile UIs. Both the companies aim to grow and strengthen their business together, continuously enhancing and activating solutions that benefit the FM teams and building occupants.Sep-2020: Tekla Structures by Trimble entered into a partnership with Metal Building Software (MBS). In this partnership, the companies have developed an exclusive connection between MBS and Tekla Structures that provides a full Building Information Modeling (BIM) process for all metal buildings. This latest workflow between MBS and Tekla Structures would offer one complete BIM solution from design & costing via detailing & fabrication for any type of metal building more precisely and in minimum time.Jul-2020: Autodesk came into partnership with eVolve MEP, the industry-leading family of data-driven, AI-enhanced, SaaS platforms, along with GTP Services LLC. The companies offer a complete fabrication workflow that allows MEP contractors to more easily adapt the Building Information Modeling (BIM) Autodesk software products and workflows. This partnership would assist contractors to make a secure environment, enable more projects to be completed on time, tackle the skilled labor shortage, and grow the total project effectiveness and profitability.Jul-2020: Dassault Systemes teamed up with Bouygues Construction, a construction engineering company. Both the companies focused on reinventing the construction sector and make it more effective and sustainable. Under this collaboration, Bouygues Construction has selected the 3DEXPERIENCE platform on the cloud to lead its business modification with the focus to enhance the productivity of its construction projects.Jun-2020: Asite teamed up with 3D Repo, a Software as a Service platform provider. In this collaboration, the companies joined forces to develop better solutions and to further simplify workflows for the AEC industry, enhancing the collaboration and decreasing the complexity for BIM data management.Feb-2020: Trimble partnered with KP1 Group, French leader of precast building systems. Through the partnership, KP1 could integrate the Trimble BIM solutions into their whole production process; from modeling the design to the fabrication data (CAD/CAM) for automation and also information for purchasing and invoicing.Jan-2020: Autodesk signed a partnership agreement with National Renewable Energy Laboratory (NREL). Under this partnership, Autodesk added an integrated building-design-to-energy-analysis workflow to Revit, known as BIM-to-BEM. By integrating building information modeling (BIM) with building energy modeling (BEM), Revit makes it easy for buildings professionals to analyze the effects of their design choices on energy utilization.Jun-2019: Dassault Systemes signed a partnership agreement with SuperMap Software, a geographic information system (GIS) software and services company. The companies aimed to indulge in platform-driven projects for construction, cities, and territories in global markets by integrating their expertise and make new guidelines for information exchange in these domains. Through the partnership, Dassault Systemes focused on advancing the usage of huge data and artificial intelligence for BIM in China.Apr-2019: Autodesk entered into a partnership with Capgemini, a French multinational corporation that provides consulting, technology, professional, and outsourcing services. The Building Information Modelling (BIM) platform for building and infrastructure operators combines the natively 1D to 3D, geographical information, point cloud, and Internet of Things (IoT) data and also provides value-added services to enhance operations and maintenance.Feb-2019: Dassault Systemes came into partnership with ABB, a Swedish-Swiss multinational corporation. The partnership aimed to provide users in digital industries a distinct software solutions portfolio that ranges from product life cycle management to asset health solutions. Under the partnership, the companies integrated the strengths of ABB Ability digital solutions and Dassault Systemes’ 3DEXPERIENCE platform and developed on both companies’ strong installed base, deep expertise in the domain, and global customer access.Acquisition and Mergers:Oct-2020: Bentley Systems took over Professional Construction Strategies Group (PCSG). Through the acquisition, Bentley can dramatically increase its advisory scope on a global scale and reach all infrastructure industries.Oct-2020: Schneider Electric completed the acquisition of RIB Software SE. This acquisition focused on making a global leader in digital and sustainable smart building solutions and Schneider Electric is actively supporting the development of RIB Software under this deal.Aug-2020: Autodesk took over Pype and its portfolio of cloud-based software solutions for the construction sector. The acquisition aimed to offer additional value for Autodesk Construction Cloud customers, enabling general contractors, subcontractors, and owners to unmanned workflows like submittals and project closeout to raise the total productivity and decrease risk across the project lifecycle.Mar-2020: Bentley Systems completed the acquisition of GroupBC, a leading UK SaaS software innovator. Together, the companies would support, through going digital, construction and asset lifecycles.Dec-2018: Autodesk acquired PlanGrid, a leading provider of construction productivity software. In this acquisition, Autodesk integrated its capabilities to offer construction customers immediate benefits and assist them to make new and innovative ways of working.Oct-2018: Hexagon acquired Bricsys, a fast-growing developer of CAD software. The acquisition reinforced the company’s domain expertise in building design, floors, adding walls, doors, and other construction-related features.Aug-2018: Nemetschek acquired MCS Solutions Group, provider of building management software. Through the acquisition, the Nemetschek Group entered the dynamically increasing building operations management market.Jun-2018: Bentley Systems took over Synchro Software, a software company. This acquisition widened Bentley’s ProjectWise construction range that includes ConstructSim for 4D construction modeling in project delivery of industrial units.Product Launches and Product Expansions:Mar-2021: Trimble unveiled the latest versions of its Tekla software solutions, Tekla Structures 2021, Tekla Tedds 2021, Tekla Structural Designer 2021, and Tekla PowerFab 2021. This new version aims for constructible Building Information Modeling (BIM), structural engineering, and steel fabrication management. The latest Tekla software features and advancements continue to power data-driven, collaborative and connected workflows all over the project phases.Nov-2020: Autodesk Introduced three new products, Autodesk Build, Autodesk Quantify, and Autodesk BIM Collaborate. These products are added to the company’s construction cloud offerings and the company also unveiled the digital twin management tool Autodesk Tandem. Autodesk Quantify enables construction estimators to carry out quantity take-offs from both 2D plans and 3D models on a single platform. Autodesk BIM Collaborate is designed to assist building teams to align and execute on design intent by operating the whole design collaboration and coordination workflow from one solution.Oct-2020: Hexagon’s Geospatial division introduced Luciad 2020.1, a significant update to its platform. The platform offers immersive 3D experiences with 360° panoramic imagery support that could integrate with other 3D data layers, a distinct capability in the geospatial application market. This release also features some additional styling for 3D meshes and 3D data integration offerings.Jul-2020: Bentley Systems released Virtuosity. It offers Virtuoso Subscriptions that are bundled with a Bentley infrastructure modeling, simulation, or construction application to boost and improve the success of an infrastructure practitioner.Mar-2020: Trimble launched the latest versions of its Tekla software solutions, Tekla Tedds 2020, Tekla Structural Designer 2020, Tekla Structures 2020, and Tekla PowerFab 2020. These new versions aim for advanced Building Information Modeling (BIM), structural engineering, and steel fabrication management. Tekla software is important for design and construction workflows building on the free flow of information, constructible models, and enhanced collaboration.Oct-2019: Autodesk introduced an improvement to BIM 360 that includes a recently developed Layout app for mobile devices on Android operating systems. It features the improved BIM 360 Layout app that includes direct sync with the cloud, Direct connection to Robotic Total Stations & GPS devices, Intuitive and customer-friendly UI.Oct-2019: Allplan, a subsidiary of Nemetschek introduced Allplan 2020, the latest version of its BIM solution. This solution is for architects and engineers who aim at interdisciplinary collaboration and 3D modeling. The latest version helps architects in modeling stairs & roofs and also complicated shapes utilizing the new integrated Visual Scripting.Oct-2019: Bentley Systems introduced new additions and updates to its open modeling applications and open simulation applications. The open applications allow iterative, collaborative, and automated digital workflows spanning infrastructure professional disciplines. With the latest digital twin cloud services, the company expanded business value and actionable insights across the construction and operations phases of an infrastructure asset.Sep-2019: AVEVA released integrated engineering software. This launch aimed to help users transform the way capital projects are executed, engineered, and integrated into operations & maintenance. This integrated portfolio includes three software solutions. AVEVA Unified Engineering effortlessly combines the process design with front-end engineering and detailed 3D-based design.Scope of the StudyMarket Segments covered in the Report:By Component• Solution• ServicesBy Building Type• Commercial• Industrial• ResidentialBy Project Life Cycle• Preconstruction• Construction• OperationsBy Deployment Type• On-premise• CloudBy Application• Planning & Modelling• Asset Management• Construction & Design• Building System Analysis & Maintenance Scheduling• OthersBy End User• Architects/Engineers• Contractors & OthersBy Geography• North Americao USo Canadao Mexicoo Rest of North America• Europeo Germanyo UKo Franceo Russiao Spaino Italyo Rest of Europe• Asia Pacifico Chinao Japano Indiao South Koreao Singaporeo Malaysiao Rest of Asia Pacific• LAMEAo Brazilo Argentinao UAEo Saudi Arabiao South Africao Nigeriao Rest of LAMEACompanies Profiled• Autodesk, Inc.• Nemetschek Group• Bentley Systems, Inc.• Trimble, Inc.• Dassault Systemes SE• Hexagon AB• Schneider Electric SE• Asite limited• Archidata, Inc.• The Beck GroupUnique Offerings • Exhaustive coverage• Highest number of market tables and figures• Subscription based model available• Guaranteed best price• Assured post sales research support with 10% customization freeRead the full report: https://www.reportlinker.com/p06064790/?utm_source=GNWAbout ReportlinkerReportLinker is an award-winning market research solution. Reportlinker finds and organizes the latest industry data so you get all the market research you need - instantly, in one place.__________________________ CONTACT: Clare: email@example.com US: (339)-368-6001 Intl: +1 339-368-6001
New Delhi, Apr 22 (PTI) Tata Motors on Thursday said its British arm Jaguar Land Rover (JLR) will be suspending production at two of its plants from April 26 due to supply chain disruption due to COVID-19 pandemic.
Jefferson is thrilled that he dropped to the Vikings in the 2020 draft after the Eagles decided to pick Jalen Reagor instead of him.
Acumen Research and Consulting, a global provider of market research studies, in a recently published report titled “Piling Machine Market – Global Industry Analysis, Market Size, Opportunities and Forecast, 2020-2027”LOS ANGELES, April 22, 2021 (GLOBE NEWSWIRE) -- The Global Piling Machine Market is anticipated to grow at a CAGR of around 4.0% during the forecast period 2020 to 2027 and to reach around US$ 7.6Bn by 2027. Increasing construction and infrastructure development projects across the globe is expected to drive the growth of the global piling machine market. The market in North America is expected to account for a noticeable revenue share in the global piling machine market due to increasing construction activities in the region. Players are focused on enhancing the operational efficiency on the construction site. They are adopting more advanced and enhanced equipment in order to avoid any fault margin in the construction phase. Players are using of highly advanced and sophisticated pieces of engineering such as vibratory drivers and piling rigs in the construction of high-rise buildings, overpasses, and other architectural marvels. Player’s inclination towards gaining construction contracts is expected to support the growth of the target market. DOWNLOAD SAMPLE PAGES OF THIS REPORT@ https://www.acumenresearchandconsulting.com/request-sample/2583 The market in Asia Pacific is expected to account for a major revenue share in the piling machine market due to rapid urbanization in developing countries. The government of developing countries is spending high on development of advanced infrastructure. This is increasing the construction activities in the region. According to Ministry of Commerce & Industry, Government of India, the infrastructure sector has become the biggest focus area for the Government of India. India plans to spend US$ 1.4 trillion on infrastructure during 2019-23 to have a sustainable development of the country. Major players approach towards emerging economies in order to track the untapped market and introduction of new solutions are factors expected to impact the growth of target market. In 2021, Sany India, a global leader in the construction industry launched “Piling Rig SR235” for a reliable structure is designed for all arduous applications. The product launch is the first regional product and is expected to help strengthen the regional manufacturing capabilities. In 2019, Eimco Elecon a leading manufacturer and supplier of various mining and construction equipment launched “Piling Rig model EC-216”. This product launch helped the company to enhance the product portfolio and increase the revenue share in the Indian market. VIEW TABLE OF CONTENT OF THIS REPORT@ https://www.acumenresearchandconsulting.com/piling-machine-market Rapid technological advancements in construction equipment, increasing construction and infrastructure development projects is resulting in demand for piling rigs this is a major factor expected to drive the growth of the global piling machine market. Piling rigs is major rely used on construction sites to drill challenging terrains such as porous soil, or silty clay fields for foundation strengthening and other support work. High investment by major players for product development and introduction of new products with high precision is expected to impact the growth of the piling machine market. In 2021, Casagrande S.p.a a global construction equipment manufacturer launched “C20-Classic hydraulic piling rigs”. The C20 is designed to satisfy the European Union standards on safety and is manufactured to comply with the ISO 9001 requirements on quality. In 2020, Aarsleff a global equipment manufacturer launched the “PMx22 piling rig”. The PMx22 provides benefits such as lower emissions, better fuel economy, quieter and safer operations, and more reliability. The product was an addition to the existing product line. Browse Upcoming Market Research Reports@ https://www.acumenresearchandconsulting.com/forthcoming-reports Factors such as high cost associated to product and maintenance and lack of investment for development are factors expected to hamper the growth of the global piling machine market. In addition, inclination towards equipment renting is lowering the demand for new products this is expected to challenge the growth of the target market. However, increasing investment by major players for the development of low cost products and increasing construction activities are factors expected to create new opportunities for players operating in the piling machine market over the forecast period. In addition, increasing partnerships and agreements is expected to support the revenue transaction of the target market. The global piling machine market is segmented into product types and methods. The method segment is bifurcated into impact-driven, drilled percussive, rotary bored, air-lift rcd rig, auger boring, continuous flight auger, and others. Players operating in the global piling machine market are MAIT S.p.A., Soilmec S.p.A., BSP International Foundations, International Construction Equipment, Liebherr Group, Bauer AG; Casagrande S.p.a, ABI GmbH, TRANSOCEAN LTD., Changsha Tianwei Engineering Machinery Manufacturing Co., Ltd., TES CAR SRL, Junttan Oy, Liugong Machinery Co., Ltd., Shenzhen Sinovo Electric Technologies Co., Ltd. The market is highly competitive due to presence of large number of players operating on a global level. INQUIRY BEFORE BUYING@ https://www.acumenresearchandconsulting.com/inquiry-before-buying/2583 BUY THIS PREMIUM RESEARCH REPORT - https://www.acumenresearchandconsulting.com/buy-now/0/2583 Would like to place an order or any question, please feel free to contact at firstname.lastname@example.org | +1 407 915 4157 For Latest Update Follow Us: https://twitter.com/AcumenRC https://www.facebook.com/acumenresearchandconsulting https://www.linkedin.com/company/acumen-research-and-consulting
New Delhi, Apr 22 (PTI) The Delhi High Court Thursday observed that the COVID-19 situation in the national capital has turned “precarious” with many hospitals running out of oxygen and directed the Centre to ensure the gas is supplied to the city as per the planned allocation and without any hindrances.
Bengaluru, Apr 22 (PTI) Several shops and business establishments were allegedly forcibly shut by the administration due to a revised order by the Karnataka government on Wednesday that business establishments other than grocery and hardware will not open till May 4 as part of steps to contain the surge in coronavirus.
Last month, Greensill filed for insolvency after losing insurance coverage for its debt repackaging business.
India hit a record daily high with over 3.14 lakh Covid-19 new cases in the last 24 hours pushing country’s total tally of Covid-19 cases to 1,59,30,965, according to the health ministry data.
Survey finds Virginia Community College students grappling with food and housing insecurity.
Noida (UP), Apr 22 (PTI) The COVID-19 death toll in Uttar Pradesh's Gautam Buddh Nagar rose to 129 on Thursday with 11 more fatalities, the highest in a day till date, while 530 new cases pushed the infection tally to 32,133, official data showed.
The country records 314,835 new daily cases as Delhi hospitals fear running out of oxygen in hours.
The Global Business Process Automation Market size is expected to reach $19. 4 billion by 2026, rising at a market growth of 13. 2% CAGR during the forecast period. The utilization of technology to perform repetitive tasks or processes in a business where manual efforts can be substituted is known as business process automation.New York, April 22, 2021 (GLOBE NEWSWIRE) -- Reportlinker.com announces the release of the report "Global Business Process Automation Market By Component, By Business Function, By Deployment Type, By Enterprise Size, By End User, By Region, Industry Analysis and Forecast, 2020 - 2026" - https://www.reportlinker.com/p06064791/?utm_source=GNW It is performed with an aim to reduce costs, enhance efficiency, & simplify processes.For corporate functions, business process management has always been a crucial factor; however, only in recent years a bright possibility emerged to refine and simplify the several activities contained in this domain. A large number of companies operating in a wide range of industries have become more dependent on digital technology for various corporate operations and objective realization, automation has gained a major position in the IT investment landscape.The installation of strategic solutions and frameworks that will cut down the chances of errors, rework, and other ineffective processes, boost employee engagement, enhance the accuracy of reporting and free up main staff members to focus on performance enhancement are the common principle of automation in the modern day workplace. From data entry and invoice processing to typical content management and records outlook, the applications of business process automation would expand more in the midst of increasing demand for the solutions.Component OutlookBased on Component, the market is segmented into Platforms (Without Services) and Services. The Platforms (Without Services) market dominated the Global Business Process Automation Market by Component 2019, growing at a CAGR of 12.2 % during the forecast period. The Services market is expected to witness a CAGR of 15.4% during (2020 - 2026).Business Function OutlookBased on Business Function, the market is segmented into Sales & Marketing Automation, Supply Chain Automation, Human Resource Automation, Accounting & Finance Automation, Customer Service Support Automation and Others. The Sales & Marketing Automation market dominated the Global Business Process Automation Market by Business Function 2019. The Supply Chain Automation market is experiencing a CAGR of 12.2% during (2020 - 2026). Additionally, The Human Resource Automation market is witnessing a CAGR of 13.9% during (2020 - 2026).Deployment Type OutlookBased on Deployment Type, the market is segmented into On-premise and Cloud. On the basis of the deployment model, the on-premises segment would procure the major revenue share in the BPA market during the forecast period. In the on-premises delivery mode, software or platforms are implemented and managed from the in-house server of customers and computing framework. The price of implementing on-premises platforms is involved in the Capital Expenditure (CAPEX) of organizations.Enterprise Size OutlookBased on Enterprise Size, the market is segmented into Large Enterprises and Small & Medium Enterprises. Due to massive initial upfront prices and the requirement for manual intervention, the on-premises deployment type can be purchased only by big companies. Big companies install the on-premises BPA platforms due to privacy and security concerns associated with sensitive data.End User OutlookBased on End User, the market is segmented into BFSI, Retail & Consumer Goods, Manufacturing, Healthcare, Telecom & IT and Others. The BFSI market dominated the Global Business Process Automation Market by End User 2019. The Retail & Consumer Goods market is showcasing a CAGR of 13.5% during (2020 - 2026). The Manufacturing market is poised to grow at a CAGR of 14.8% during (2020 - 2026). Additionally, The Healthcare market is expected to witness a CAGR of 14.2% during (2020 - 2026).Regional OutlookBased on Regions, the market is segmented into North America, Europe, Asia Pacific, and Latin America, Middle East & Africa. In 2019, North America emerged as the leading region of the global business process automation market. North America has always been a technologically advanced region with respect to the adoption of modern technologies because of the high awareness among companies about the advantages and the existence of expertise among the workforce to create innovative solutions across all technology segments.The major strategies followed by the market participants are Acquisition and Partnerships. Based on the Analysis presented in the Cardinal matrix; Microsoft Corporation are the forerunners in the Business Process Automation Market. Companies such as Nintex, Inc., IBM Corporation, and Pegasystems, Inc., Oracle Corporation Salesforce.com, Inc. are some of the key innovators in the market.The market research report covers the analysis of key stake holders of the market. Key companies profiled in the report include IBM Corporation, Oracle Corporation, Software AG, Salesforce.com, Inc., Microsoft Corporation, Appian Corporation, Pegasystems, Inc., DXC Technology Company, AgilePoint, and Nintex, Inc.Recent strategies deployed in Business Process Automation MarketPartnerships, Collaborations, and Agreements:Mar-2021: Nintex collaborated with Zoom Video Communications. Under this collaboration, Nintex Workflow Cloud, the cloud-first platform aims to help Zoom Video Communications to enhance its channel order process.Feb-2021: Software AG came into collaboration with Automation Anywhere, a global leader in Robotic Process Automation. In this collaboration, Software AG’s ARIS platform would support Automation Anywhere RPA with process mining and process management. It also enhanced the discovery of automation opportunities and then management of automated processes.Dec-2020: Software AG partnered with Re’flekt, a provider of augmented reality solutions (AR). The partnership aimed to integrate the interactive AR visualizations from Re’flekt with real-time machine data from the Cumulocity IoT platform. Both the companies enable organizations to get benefits from radically enhanced first-time fix rates with their machinery and also substantially expanded maintenance cycles.Oct-2020: IBM extended its partnership with ServiceNow, an American software company based in Santa Clara, California. This expansion aimed to assist companies to decrease operational risk and cut down costs by implementing AI to automate IT operations. The companies integrated IBM’s AI-powered hybrid cloud software and professional services to ServiceNow’s intelligent workflow offerings & market-leading IT service and operations management products.Sep-2020: IBM along with Buoy Health collaborated with Conduent Incorporated, a business process services, and solutions company. Conduent integrates IBM and Buoy Health’s cutting-edge technologies and prompt health care resources onto Conduent’s Life@Work platform. The customers of Conduent can utilize the HR platform to access Buoy’s full digital navigation product portfolio that consists of artificial intelligence (AI) driven tools, which assist people to get the appropriate care at the correct time, and IBM Return-to-Workplace Advisor, a data and AI-driven application, which helps companies in operating a secure and efficient return to the workplace.Sep-2020: DXC Technology extended its partnership with Pegasystems. The expanded partnership combined DXC’s application transformation services with Pegasystems’ market-leading digital equipment to fast-track enterprise users’ transition to modern applications and services.Jul-2020: Appian collaborated with Automation Anywhere, a developer of robotic process automation software. The collaboration allows Appian users’ Center of Excellence (COE) to provide visibility, scalability, governance, and control over the robotic process automation (RPA) digital workforce offered by Automation Anywhere.Jun-2020: Oracle teamed up with UiPath, a leading enterprise Robotic Process Automation (RPA) software company. In this collaboration, the companies combined powerful RPA with Oracle Cloud Infrastructure and business applications. The collaboration enables users to simplify complex workflows & complicated processes and aim at strategic tasks that need a human touch.Jun-2020: Nintex came into partnership with BPD Zenith, a leading provider of Asset Management solutions. The partnership aimed to assist enterprise organizations to boost business outcomes and enhance the way people work. By using the easy-to-use, powerful and comprehensive offerings of the Nintex Process Platform, BPD Zenith helps users realize the value of automating, managing and optimizing business processes on their path to digital transformation.Mar-2020: Appian partnered with Deloitte Consulting, an Anglo-American multinational professional services network. Under this partnership, the companies aimed to provide customers with the ability to modernize their systems via low-code development and intelligent automation that varies across several technologies, which includes robotic process automation (RPA), artificial intelligence (AI), robotic workforce management (RWM) and many more.Jan-20202: IBM extended the partnership with Blue Prism, a global leader in Robotic Process Automation. The collaboration combined three main capabilities of IBM Cloud Pak for Automation that consists of Workflow, Capture, and Decisions, with Blue Prism’s Digital Workforce.Jan-2020: Appian came into partnership with Celonis, the market leader in AI-enhanced Process Mining and Process Excellence software. Together, the companies aimed to boost digital business process transformation and continuous process enhancements for joint users.Oct-2019: Salesforce teamed up with UiPath, a leading enterprise Robotic Process Automation (RPA) software company. Under this collaboration, UiPath launched UiPath Connector for Salesforce, accessible on Salesforce AppExchange. The UiPath Connector for Salesforce allows users to simplify complicated workflows around various technologies by introducing UiPath automation based on Salesforce.May-2019: Appian entered into a partnership with UiPath, the leading enterprise robotic process automation (RPA) Software Company. This partnership involves a no-code integration between Appian and the UiPath platform, which can be accessed on the Appian AppMarket.Apr-2019: Oracle joined hands with Automation Anywhere, the global leader in Robotic Process Automation. The collaboration focused on accelerating intelligent automation and advanced adoption of the company’s AI-driven software bots inside the Oracle Integration Cloud.Acquisition and Mergers:Oct-2020: Nintex completed its acquisition of K2 Software, a provider of digital process automation (DPA) software solutions. This Acquisition of K2 Signals helped Nintex to Grow and Change for the Digital Process Automation Market.Jul-2020: IBM announced the acquisition of WDG Automation, robotic process automation (RPA) software provider in Brazil. This acquisition automated millions of manual business processes globally that include IT service management (ITSM) and help desk tasks.May-2020: Microsoft took over Softomotive, a world-leading provider of robotic process automation (RPA). The acquisition aimed to bring Softomotive’s desktop automation with the prevailing Microsoft Power Automate offerings at exceptionally affordable pricing. Further, Microsoft democratizes RPA and allowing everyone to make bots to automatize the manual business processes.Jan-2020: Appian acquired Novayre Solutions SL, developer of the Jidoka RPA platform. This acquisition helped Appian to be a one-stop-shop for Automation, with best-in-class solutions for workflow, AI, and RPA.Product Launches and Product Expansions:Feb-2021: Nintex introduced the latest improvements in the company’s next-generation cloud platform, Nintex Workflow Cloud. It features effortless integration with Nintex Analytics to offer users and partners real-time data analytics regarding the performance of their digital workflows.Jan-2021: AgilePoint unveiled the new Microsoft Power Automate connector. The connector expands two-way communication between Power Automate and the AgilePoint digital process automation platform.Dec-2020: Salesforce unveiled Einstein Automate, an end-to-end workflow automation solution. The solution empowers individuals and companies to increase their productivity. Einstein Automate offers automation capabilities developed for each business function and sector that allow anyone in a company to create intelligent workflows and combine the data over any system with clicks, not code.Nov-2020: IBM Introduced a series of data and automation updates to its hybrid cloud software portfolio. The new updates are added to IBM Cloud Pak for Data and Cloud Pak for Automation that combines data and AI capabilities, which operates on Red Hat OpenShift and are developed to enhance the management and automation data-intensive processes that fuse the intelligence of Watson AI in hybrid cloud environments.Nov-2020: Pegasystems unveiled Pega RPA Auto-balancing, the industry’s first Robotic Process Automation. It features artificial intelligence to develop the capacity and effectiveness of bot resources as required with no outside human intervention.May-2020: Pegasystems introduced its all-new Pega Academy. It is a tool developed to assist customers and partners fastly gain and enhance Pega software skills. Any user whether total beginners or more advanced Lead System Architects can learn, extend and refresh important Pega skills to assist their businesses to gain true digital transformation.Apr-2020: Nintex introduced advancements in its cloud-first process automation solution, Nintex Workflow Cloud. It includes the market’s first offering and the ability for users to faster and easier manages the workflows including the robotic process automation (RPA) bots. The new feature in Nintex Workflow Cloud, called Nintex Gateway, offers two-way, drag-and-drop interaction between workflows and bots.Mar-2020: Appian released the latest version of the Appian Low-code Automation Platform. This version offers material business impact with united, flexible, and quick enterprise automation. The company leads the process automation around the enterprise at the minimum Total Cost of Ownership.Oct-2019: Software AG released webMethods.io B2B, the latest addition to the company’s industry-leading B2B Integration portfolio. This solution allows customers to rapidly onboard partners and exchange documents utilizing traditional EDI or the latest API-based standards. Through this solution, Customers could make sure the timely and precise transaction of daily, important business documents and also simplifying their supply chain, boosting order-to-cash and rising customer satisfaction.Sep-2019: Nintex unveiled Nintex Workflow Generator. It allows company customers to quickly make sophisticated workflows by utilizing the cloud-based visual process mapping capability, Nintex Promapp. Nintex Workflow Generator needs no coding and is a powerful latest onramp to the automation offerings of the Nintex Process Platform. It also consists of a new feature, which is currently available to users and partners with subscriptions to Nintex Promapp and Nintex Workflow Cloud.Sep-2019: Salesforce released Manufacturing Cloud, a new industry-specific product for manufacturers. This launch brought sales and operations teams together around a united look of the market and user demands to more precise estimates, plan, and lead the predictable business performance. Companies can better fulfill their commitments and operate the more simplified business and also enhancing customer satisfaction by using the solution.Mar-2019: Oracle expanded the artificial intelligence (AI) offerings within Oracle Enterprise Resource Planning (ERP) Cloud and Oracle Enterprise Performance Management (EPM) Cloud. The machine learning-based innovations consist of an expense reporting assistant, advanced financial controls, project management digital assistant, and project-driven supply chain management.Scope of the StudyMarket Segments covered in the Report:By Component• Platforms (Without Services)• ServicesBy Business Function• Sales & Marketing Automation• Supply Chain Automation• Human Resource Automation• Accounting & Finance Automation• Customer Service Support Automation• OthersBy Deployment Type• On-premise• CloudBy Enterprise Size• Large Enterprises• Small & Medium EnterprisesBy End User• BFSI• Retail & Consumer Goods• Manufacturing• Healthcare• Telecom & IT• OthersBy Geography• North Americao USo Canadao Mexicoo Rest of North America• Europeo Germanyo UKo Franceo Russiao Spaino Italyo Rest of Europe• Asia Pacifico Chinao Japano Indiao South Koreao Singaporeo Malaysiao Rest of Asia Pacific• LAMEAo Brazilo Argentinao UAEo Saudi Arabiao South Africao Nigeriao Rest of LAMEACompanies Profiled• IBM Corporation• Oracle Corporation• Software AG• Salesforce.com, Inc.• Microsoft Corporation• Appian Corporation• Pegasystems, Inc.• DXC Technology Company• AgilePoint• Nintex, Inc.Unique Offerings • Exhaustive coverage• Highest number of market tables and figures• Subscription based model available• Guaranteed best price• Assured post sales research support with 10% customization freeRead the full report: https://www.reportlinker.com/p06064791/?utm_source=GNWAbout ReportlinkerReportLinker is an award-winning market research solution. Reportlinker finds and organizes the latest industry data so you get all the market research you need - instantly, in one place.__________________________ CONTACT: Clare: email@example.com US: (339)-368-6001 Intl: +1 339-368-6001
Russia announced on Thursday it was ordering troops back to base from the area near the border with Ukraine, apparently calling an end to a buildup of tens of thousands of soldiers that had alarmed the West. The currencies of both Russia and Ukraine rose sharply after the announcement, signalling relief among investors just hours after Russia also ended war games in Crimea, the peninsula it occupied and annexed from Ukraine in 2014. There was no immediate response from Western countries, but a pullout of the troops brought in on top of the permanent contingent was likely to be welcomed by countries that had been expressing alarm at the prospect of further Russian intervention in eastern Ukraine.
"That Keyser Soze moment was really special."
The "Clinical Development Outsourcing Models (4th Edition)" report has been added to ResearchAndMarkets.com's offering.
AICPA & CIMA ENGAGE, a leading event for accounting and finance professionals, returns this July 26-29 as a hybrid virtual and onsite event.
New Delhi, Apr 22 (PTI) The DDMA on Thursday appointed two senior bureaucrats as nodal officers to ensure smooth movement of tankers and facilitate oxygen supply to city hospitals, and directed the Delhi Police to provide security logistics from manufacturers' sites to various health facilities here.
New Delhi, Apr 22 (PTI) CPI(M) mouthpiece People's Daily has accused the Centre of being criminally negligent in handling the second wave of the coronavirus pandemic and blamed the callous politics of Prime Minister Narendra Modi and Union Home Minister Amit Shah for endangering the lives of thousands.
Kohima, Apr 22 (PTI) Nagaland on Friday reported 53 new COVID-19 cases increasing the tally to 12,800, a health official said.
Lion’s Fuel, a suite of fitness enhancement products, is now available for purchase through Amazon.